SX-200 System Options and Timers

System Options / System Timers	Generic 1001	Generic 1002 Generic 1003	Generic 1004 LW15, LW16
24 Hour Clock	01	01	01
Message Lamp test	---	02	02
Single Paging Amplifier	---	03	03
Message Waiting and Message Register	04	04	04
Clear Print
Verified Account Codes	05	05	05
Analogue Networking SMDR	---	06	06
Cancel 24-Hour Message Waiting	---	07	07
5-Digit SMDR	---	---	08
Attendant Call Block	09	09	09
Attendant Conference Beeps	10	10	10
Automatic Wakeup	11	11	11
Automatic Wakeup Alarm	12	12	12
Automatic Wakeup Print	13	13	13
Automatic Wakeup Music	14	14	14
Data Demultiplexer	15	15	15
Automated Attendant	16	16 §	16 **
Discriminating Ringing	17	17	17
Discriminating Ringing Always	18	18	18
Mitel Application Interface	---	---	19 *
Holiday Messages	20	20	20
Incoming to Outgoing Call Forward	21	21	21
Last Party Clear - Dial Tone	22	22	22
Message Register Count Additional	23	23	23
Supervisions
Message Register Audit	24	24	24
Message Register Zero After Audit	25	25	25
No Overlap Outpulsing	26	26	26
Room Status Audit	27	27	27
SUPERSET Telephone Last Number Redial	29	29	29
RESERVED	30	30	30
Satellite PBX	31	31	31
Outgoing Call Restriction	32	32	32
Room Status	33	33	33
Auto Room Status Conversion / Auto Wakeup	34	34	34
Print
Property Management System	---	35	35 ***
End Of Dial Character (#)	---	36	36
Calibrated Flash	---	37	37
Switch-Hook Flash	---	38	38
DATA SMDR Indicate Long Calls	---	39	39 **
Message Register Follows Talker	---	40	40
Automatic Call Distribution (ACD)	---	41§§	41 ***
ACD Silent Monitoring	---	42 §§	42 ***
ACD Silent Monitoring Beeps	---	43 §§	43 ***
ACD Reports	---	44 §§	44 ***
Digit Translation Plan (0 - 3)	35	46	46
ARS Unknown Digit Length Time-out	36	47	47
(2 - 60 Seconds)
Limited Wait For Dial Tone (1 - 15 Seconds)	37	48	48
Pseudo Answer Supervision Timer	38	49	49
(10 - 60 Seconds)
Dialing Conflict Timer (2 - 10 Seconds)	39	50	50
Final Ring Time-out (1 - 30 Minutes)	40	51	51
Minimum Flash Timer (20 - 50 ms; in 10 ms	41	52	52
increments)
Maximum Flash Timer (20 - 150 ms; in 10 ms	42	53	53
increments)
DISA Answer Timer (1 - 8 Seconds)	43	54	54
Account Code Length (Variable or 4 - 12	44	55	55
Digits)
Auto Room Status Conversion / Wakeup Print	45	56	56
Timer
Vacant / Reserved Room Default Call	46	57	57
Restriction
Occupied Room Default Call Restriction	---	58	58
Receivers Reserved for Non-Auto-Attendant	---	59§§	59 **
Use
Tone Plan	---	60	60
CLASS Receivers in SPINE Bay #1 (0..6)	---	---	61****
CLASS Receivers in SPINE Bay #2 (0..6)	---	---	62
CLASS Receivers in SPINE Bay #3 (0..6)	---	---	63
CLASS Receivers in SPINE Bay #4 (0..6)	---	---	64
CLASS Receivers in SPINE Bay #5 (0..6)	---	---	65
CLASS Receivers in SPINE Bay #6 (0..6)	---	---	66
CLASS Receivers in SPINE Bay #7 (0..6)	---	---	67
*    Not available in Generic 1004, LIGHTWARE Basic or LIGHTWARE 15+1.
**     Not available in LIGHTWARE Basicor LIGHTWARE 15+1.
***    Not available in LIGHTWARE Basic, LIGHTWARE 15+1, or LIGHTWARE 16 Enhanced.
****    Options 61 through 67 available in LIGHTWARE 16, MR1.
§    Not available in Generic 1002.
§§    Not available in Generic 1003 (Non-ACD) and Generic 1002.

---